Search results

My Trac just rolled past 106k and I'm getting ready for this years' vehicle inspection. Last year I needed a right side wheel bearing hub assembly, which ended up costing my $400 to have done. I'm guessing by now it's probably worth replacing the other side and other worn suspension parts on...

A couple of days ago I had my driver's side parking lamp go out. I swapped bulbs with the passenger side and confirmed with a multimeter that the wire is not hot at the connector anymore when the parking lights are turned on. Does anyone have any info on how I can track the problem down? I...

Does anyone know if the '04 Adrenaline factory amp is 510 watt rating is RMS or peak? Judging by a quick glance and puny wiring, I'm guessing it's peak, but figured I'd ask. Thanks!

Last Friday I noticed that twice, upon accelerating from a stop, my track would start to move fine, then lose engine power for a split second and then run normally. The second time, it tripped my CEL and code P0193 (fuel pressure rail sensor, etc.). I got up the next day, ran to the parts...

My harmonic balancer failed today on the way to work. Read up on here while at work to find the problem with my squealing, dropped by the parts store and got a new belt, tension pulley, and idler pulley, and went on my way. Installed everything when I got home only to find the real problem...

New, never installed (bought them before my trac, ended up getting a trac that already had them!) 2x Monroe 911035 Reflex Shock Absorber 2x Monroe 911122 Reflex Shock Absorber Prefer face-to-face in lehigh valley, PA...I don't think shipping would be cost effective for either of us...

I'm wondering if anyone knows of a way to do this. I'd like to keep my headlights from flashing when I lock the doors with the remote. Ideally, I'd keep the running lights flashing, but I'm guessing they're tied together. I'll try to keep it brief, but here is the situation. I've got a...

Been wanting to clean and get some protection on my sport trac for a while now, but weather hasn't been cooperating. Today I got lucky...It was only around 30 degrees, but the sun was out so I was able to get the job done. Yesterday was the same temp, but no sun and some wind, so the clay lube...

Does anyone know what size the torx screws that hold the plastic liner onto the tailgate are? I'm planning on adding a lock actuator to the tailgate, and I'd rather not buy a whole set right now. Thanks!

My Michelin LTX's have 2,000 miles on them, and I noticed the beginnings of very light feathering on the outside and inside edges of the fronts. I had the truck aligned when I bought the tires, and the rear tires aren't feathering at all. It's barely noticeable, but I'm keeping a close eye on...

I just put 4 new tires on my trac, and I'm wondering if I should get it aligned. The old tires showed even wear (besides the rears having less tread overall due to not rotating and a heavy right foot no doubt). The truck goes nice and straight down the road, taking into account the road crown...

Does anyone know if it's possible to rig an auxiliary input to the stock gen 1 adrenaline head unit? I think it's a great unit, this is the only thing I wish it had. Maybe using the XM inputs somehow?

Every now and then I notice that when I shift either to or from reverse in my trac the shift is a little rough. I haven't been able to find any info on this...Is it a common issue? Is it something that I should be worrying about? The transmission seems to shift great on it's own when driving...

Just thought I'd share some pix of the HID retrofit I just finished on my '04 Adrenaline. Unfortunatly it was a very lengthy process which I was trying to get done quickly, so I didn't take pictures along the way to make a project for it. Components: -Acura TL Bixenon projectors w/...

I'm going to be buying new tires soon, and I want to get rid of the pitting on the inside of my rims. They are chrome on the outside, but look like aluminum on the inside. They've been badly neglected, but the chrome on the outside still looks great (after hours of scrubbing brake dust off)...

I just Lubed my slip yoke by taking the drive shaft out. I just wanted to check...as long as the ends of the drive shaft are in sync with each other, it's in correct, right? I had thought that there was only one way to get the slip yoke back together, but mine didn't have a "double spline" as...

I just got a full set of Monroe Relfex Shocks in the mail today. I took them out to take a look...When I compress the rear shocks, one of them rebounds much too fast. When I compress the fronts, one rebounds much too slow. Did I just get ripped or is this common for Monroe shocks? It's gunna...

Sears quoted me almost $300 for a full set of Monroe reflexes today, just for the parts without installation. I just found them on amazon.com, $125 for all of them! They're on the way! This will make it easier to pick up the EE rear sway bar! If you're looking, part numbers are...

I've noticed that whenever stopping hard enough, immediately after stopping I hear/feel a "clunk", and it seems like it's pushing forward. If I'm very easy on the brakes, I don't feel/hear it. I haven't been braking too hard, but it happens whenever I brake hard enough to feel my momentum...