Recent content by Jason Ratzburg

Ford SportTrac Forum

Help Support Ford SportTrac Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. J

    Toneau cover quick release project

    Does anyone have a copy of the toneau cover quick release project. None of the pictures are working on the link. Thanks.
  2. J

    Grinding on turn

    Stock tires so don't think thats the issue. Havent checked the body mounts or sway bar links. Its possible. I took it for another spin and noticed the noise on any speed of turn. It gets louder the fast I go though. Sounds is definately from the rear. As I mentioned, I had a bearing...
  3. J

    Grinding on turn

    Hey all, got a 04' 4x4 Sport Trac and recently I've noticed a grinding sound coming from the rear of the truck when making a left hand turn. Its only when I make the turn with some speed and seems to almost be the result of body roll. I've had a bearing go before and this is different. Like I...
  4. J

    Stuck in 4x4 high

    Hey all, I have a 2004 4x4 Sport Trac. Got snow yesterday so I turned on 4x4 high and drove in the snow. Then once the roads started to clear up I turned it off. I hear clicking and the light on the dash works as expected, however the 4x4 didnt disengage until a mile or so and did so with a...
  5. J

    Really ... new wheel bearings at a 109k?

    Just did my own for about $125 per side. If you can change your brakes you can change your bearing assembly. It went out at 55k miles.
  6. J

    Hub Bearing

    I actually brougth the truck into a shop that does free diagnoses. They concluded it was the front drivers side hub. They quoted $450 so I said no thanks and ordered the part of advanced auto parts. The hub was a MOOG for $137 and the 32mm socket was $14. I used a coupon code (VISA) for $50 off...
  7. J

    Hub Bearing

    I actually am going to get advanced auto Moog ones. They're about $140 but after coupon I can get it for about $105.
  8. J

    Hub Bearing

    So, pretty sure I've either got a bad ABS sensor or bad hub bearing. My understanding is even if its the sensor the whole assemply needs to be replaced...correct? I see there are two through autozone. A timken for $160 and duralast for $109. Is it worth the extra $50 or has anyone had bad...
  9. J

    Antilock brakes when turning/stopping

    The truck is 4wd but I'm getting the problem when I'm in 2wd.
  10. J

    Antilock brakes when turning/stopping

    I know the title is weird but here's my problem. When I'm turning and braking (ie: parking space) sometimes the antilock kicks in and my brakes pulsate for the last bit of movement. I dont seem to have any problem during normal breaking or anything else. Any ideas as to why the antilock would...
  11. J

    Referb stuff

    I just got a refurb kindle fire last thursday and I couldnt be happier. It looks brand new (no scratches or anything) and it still comes with teh same warranty so theres no risk. I say go for it.
  12. J

    Heated seats

    My driver side switch had gone bad on my 04. It was always on which makes for a long drive in the summer. I wired in a rocker switcht to my dash. Basically, the stock switch is still there but i can now turn the power to that switch on and off from the dash.
  13. J

    Adding a clock

    rmac, thats my same thoughts. I dont want to have to deal with batteries and I dont want ot deal with lights and illumination. I'm finding clock displays from other cars on ebay but just was wondering if I can just plug it in and go on my way.
  14. J

    Adding a clock

    Here's my dilema. I put in an aftermarket stereo but I can only have the clock or the song display up at one time. I want to add a clock display in the little storage bin underneath the headunit so that I have a clock and can display my song information. Can I just get any led clock display...
  15. J

    Oil Change Lessons Learned

    I did this with 5qts of Mobil1 EP and a Mobil 1 EP filter. Farm and fleet gave me a a new filter and 5 new qts of oil. They never questioned me and I didnt realize the old gasket on until I got home and started the process over. Oh well, live and learn.
Top