Search results

This will be the 2nd time the plastic covers on my Cruise Control buttons have "cracked up". I think the replacement unit I installed was MotorCraft which lasted 8-9 years ( I use my Cruise ALL the time). Shopping for a replacement set of switches I see the prices range from the teens to the...

The wife's '02 S/T had/has a similar oil leak. After spending some time chasing the source(s) down I found one source to be the o-ring between the oil filter adapter and the engine block. It's real had to see and my 1st thought was that the valve cover was leaking. I found that oil would...

Fellows... Any idea what year Ford introduced this "fix" with the "improved" parts?

Dillardooo. Thanks for the pictures. Could youtell us which one is for which side of the engine please? Wife has a '02 S/T which we bought new, now has 245K on it. Lost the D/S cassette when the engine had 134k around the year 2009/2010. Had to decide what to do with then engine and made the...

Thanks Fellows. I took a look at the ODBLink program. I now realize I "purchased" that program several years ago to use with my WIn7 Laptop. Never could get the program "figgured out". My fault probably due to my "impatience". And "issues" I had with that Laptop. That's why I'm asking about...

Dillardood. Thanks but I'm really in search of a stand alone unit

Fellows. Excuse me if I've asked this in the past (never acted on it if I did) but I'd like recommendations on a Code Reader. I don't have a "reliable" laptop so the program you can D/L of the internet (forgot the name) is out. Unless it is overwhelmingly recommended then perhaps I'll be...

Being a bit "short" my wife uses the ones on her S/T everytime she enters the S/T. I'm looking to have them ....refinished....forgot the name of the process....

Replaced the ones on my '02 with 1/2" Plex tubing. I marked the location of the striker(s) then removed them. Disassembled the bolt from the striker and removed the old bushing. Installed the "new" bushing and reinstalled everything. I "think" I had to removed (sand down) the diameter of the...

Im missing the little black screws that retain the black plastic cover that is on the inside of the Center Console Lid. Not the HINGE SCREWS. They are a small counter sunk screw with real course threads. There is about 9 of them per lid. Perhaps someone is parting out a early S/T and...

Is a non-steel hood available for the 02 Sport-Trac? One that is a direct replacement for the OEM steel unit ie no scoops, risers, etc.

Same symptom as mine. Happened repeatedly over the course of several months. Turned out to be the fuel pump. Even the Dealer couldnt figure it out and had driven stopped/started the car 100 miles or so. They didnt guaranty is was the FP but I made the call to change it out. $1600 late all...

Just finished replacing the rotted out OEM Body Mounts on the wife's '02 ST with the Prothane kit. Was not as hard as I thought it was going to be but I purchased a electric impact gun to loosen and remove the bolts. The vehicle is rust free and I keep the belly very clean so I didnt have...

Thanks Fellows: I'll update you all when I have this job done.

Plan on changing out ALL the deteriorated OEM body mount insulators/bushings on my '02 S/T. Ive got the Poly Bushing kit from Prothane and a big can of PB rust buster. I would like to know what "special tools" I might need. I know I'll have to remove the interior. How much...

Ed: How hard was it to change the rear tensioner? We lost the engine in my wife's '02 because of the front tensioner failing. I plan on installing new tensioners every 75K but really dread the idea of doing the rears. Thanks, ptf18

New Ford OEM V6 4.0 L/H Valve cover p/n 4L5Z6582JA with Gasket $55 plus actual shipping cost. New Ford OEWm V6 4.0 L/H Valve Cover Gasket p/n 1L2Z6584AA $10. Contact me at [email protected]

Fellows: Thank you all. I have 2 of these thin washers left over and the brakes seem to work fine (as reported by the wife) They might have gone on the adjusters as a few of you mentioned. Now Ive got other "issues" with the engine not starting but I will post that else where. thanks

noheat: Thank you very much. Its not a spring nut. I removed those years ago when I pulled the drums off to look at the brake shoes etc. These "washers" seem to be a shim as I mentioned about a nickle size, very thin, made from stainless steel I think, and they seem they would fit over a...

Finished replacing the rear brakes and spring kit on my 02 Sport TRac and found a thin nickle size washer (maybe a shim) with a large ID hole. I have no idea where it goes or why I didnt see it when I disassembled things. Found 2. One for each side I suppose. I think it must of stiuck to...