Joe Marek
Member
I just purchased a factory sub and wiring harness from another board member. The problem I have run into is that my trac doesn't have the plug for the harness in the pass side kick panel area that runs behind the radio. I have an aftermarket deck and figured I should be able to splice into it without the harness. Does anyone know the wiring for the factory harness? I would think there should be a power, ground, remote, positive & negative (sound). Any help would be greatly appreciated. The wire colors are as follows
Purple/Blue
Black/Green
Green/Purple
Red/Black
Brown/Orange
Black
Purple/Blue
Black/Green
Green/Purple
Red/Black
Brown/Orange
Black