J. Olenko
Member
My console lid was cracking very badly and just looked really bad too. I went to my local fabric store that sold some vinyl/leatherette material that was very, very close in color to my original console material. I unscrewed the console cover and took it into the fabric store to get it as to the original color as possible. Went home and about an hour later I had the new material on the cover and I am very pleased with the results. The console lid is back on the Trac and looks factory like. Stapling the material to the original plastic console lid base was a little tricky as was curving the lid corners. Bottom line is a lid repair can be done quite easily. (The enclosed picture shows the old lid cover and the new finished one).
</p><p><center><img src=http://i4.photobucket.com/albums/y101/kewlthings/DCP23142_zps79ff8aa1.jpg></p></center>
</p><p><center><img src=http://i4.photobucket.com/albums/y101/kewlthings/DCP23142_zps79ff8aa1.jpg></p></center>
Last edited by a moderator: