K Kyle McManus Member Joined Feb 20, 2006 Messages 46 Reaction score 0 Location Honor, MI Nov 15, 2006 #1 My second gear seems to be slipping for a good two or three seconds. Anyone have this problem or know the problem? Thanks
My second gear seems to be slipping for a good two or three seconds. Anyone have this problem or know the problem? Thanks
S shawn stonbraker 2 Well-Known Member Joined Mar 31, 2005 Messages 4,007 Reaction score 2 Location punxsutawney, PA Nov 15, 2006 #2 Any OD light? If not, get your tranny oil and filter changed. See if that helps. There is also an EPC adjustment project if you change it yourself. It might help. There is a project to change the fluid/filter also. (all from yours truely) Last edited by a moderator: Nov 15, 2006
Any OD light? If not, get your tranny oil and filter changed. See if that helps. There is also an EPC adjustment project if you change it yourself. It might help. There is a project to change the fluid/filter also. (all from yours truely)
Todd Z Well-Known Member 4 wheel drive 2nd Gen owner V8 Engine Joined Sep 21, 2003 Messages 22,363 Reaction score 752 Location Long Island, NY What engine do you have? V8 engine What year is your Sport Trac? 2010 What Generation is your Sport Trac? 2n Gen Owner Nov 15, 2006 #3 Can disconnect the negative battery cable for 1/2 hour to reset the computer. BUT I think you have a bad solenoid and if you continue to drive it like that it will pull the pin on the ST tranny grenade... Todd Z Last edited by a moderator: Nov 15, 2006
Can disconnect the negative battery cable for 1/2 hour to reset the computer. BUT I think you have a bad solenoid and if you continue to drive it like that it will pull the pin on the ST tranny grenade... Todd Z
V vik singh Active Member Joined Nov 20, 2005 Messages 150 Reaction score 0 Location mississauga, ON Nov 17, 2006 #4 yup i would change my solenoid first..I hat that problem and swapped all the solenoid and it fixed my problem.
yup i would change my solenoid first..I hat that problem and swapped all the solenoid and it fixed my problem.