James Holmes
Member
I have 2007 with a cigarette lighter, but no ash tray, go figure. I need to know if it is possible to switch that for a 12 volt outlet.
AUXILIARY POWER POINT (12VDC) [near shifter]
Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlet as this will damage the outlet and blow the fuse. Do not hang any type of accessory or accessory bracket from the plug. Improper use of the power outlet can cause damage not covered by your warranty.
[Broken External Image]:
The auxiliary power point is located in the floor console.
Do not use the power point for operating the cigarette lighter element (if equipped).
To prevent the fuse from being blown, do not use the power point(s) over the vehicle capacity of 12 VDC/180W.
To prevent the battery from being discharged, do not use the power point longer than necessary when the engine is not running.
Always keep the power point caps closed when not being used.
Cigar/Cigarette lighter (if equipped)
Do not plug optional electrical accessories into the cigarette lighter socket.
Do not hold the lighter in with your hand while it is heating, this will damage the lighter element and socket. The lighter will be released from its heating position when it is ready to be used.
Improper use of the lighter can cause damage not covered by your warranty.
Rear auxiliary power point
[Broken External Image]:
A second auxiliary power point is located on the rear side of the console. It is accessible from the rear seats.
Truck bed auxiliary power point
An additional auxiliary power point is located in the bed of the truck (12V 20AMP max).
Lift the cover to access the auxiliary power point.
I need to know if it is possible to switch that for a 12 volt outlet.
Enter your email address to join: