kaw900r
Member
How do you get the axles to release from the TC? I have sprayed them with WD40 and let it sit, then tried a hammer and bar to knock it back and it will not separate.
Maybe you could pull the drain plug off and look in to see if it is the chain or not
You may or may not be able to look inside
Ford for life
I knew it wasn't the T case... the only good thing is the 3:55 v8 rear end is such a boat anchor that junk yards give them away as nobody wants them.... they all want the 3:73 v6 rear.... LOL.... So its an easy cheep repair.... Unless like me you upgrade gears and install a LSD...
Well I turned but spare tire never moved so I moved forward. Old differential/carrier is out axles game me hell getting out but about 2 hours later they were out and plan to put it back together tomorrow. Not sure what is broken inside but I did here something rolling around.
I’m definitely confused because I thought you just replace the rear end ??
Unfortunately I don’t know. But are you 100% sure the junk yard rear is blown??? Did you test the driveshaft CV head?? Not the carrier bearing.
Did you remove the drive shaft and verify what’s bad now?? Over the internet it’s hard to help with stuff like this.
Enter your email address to join: