Shawn White
Member
Hey gang, it's been a while since I posted, but I still check in from time to time since I traded in my Trac for my 2012 F-150. I have to say this forum has a great bunch of folks tied to it. I've posted a number of questions other forums, but am often unable to get a response.
I was hoping I could ask the Trac crew if I could get some help tracking down PID information for the 2012 or 2010 model year Fords.
I looked at the Scan Gauge webpage and the only PID I was able to get to work on both my 2010 Escape and 2012 F-150 is the trans temp (PID: 07E0221E1C)
I think Ford changed the CAN bus sometime in 2009 or 2010 as all the codes on the Scan Gauge page work on my buddies 2008 F-150.
I was wondering if anyone had PIDs for the following parameters:
-Torque Into Converter
-Cylinder Head Temperature
-Converter Speed Ratio
-Fuel Level
-Torque Converter Line Pressure
-Transmission Output Speed Shaft
-Transmission Gear Ratio
-Fuel Pressure
Thanks so much,
Shawn
I was hoping I could ask the Trac crew if I could get some help tracking down PID information for the 2012 or 2010 model year Fords.
I looked at the Scan Gauge webpage and the only PID I was able to get to work on both my 2010 Escape and 2012 F-150 is the trans temp (PID: 07E0221E1C)
I think Ford changed the CAN bus sometime in 2009 or 2010 as all the codes on the Scan Gauge page work on my buddies 2008 F-150.
I was wondering if anyone had PIDs for the following parameters:
-Torque Into Converter
-Cylinder Head Temperature
-Converter Speed Ratio
-Fuel Level
-Torque Converter Line Pressure
-Transmission Output Speed Shaft
-Transmission Gear Ratio
-Fuel Pressure
Thanks so much,
Shawn