Mike Corn
Active Member
how do I remove the front rotors I have removed all bolts even the one kind of hidden. Ihave been beating on them but they wont pop loose.
help cannot remove rotors!!!
- Thread starter Mike Corn
- Start date
Help Support Ford SportTrac Forum:
- Joined
- Sep 21, 2003
- Messages
- 22,366
- Reaction score
- 752
- Location
- Long Island, NY
- What engine do you have?
- V8 engine
- What year is your Sport Trac?
- 2010
- What Generation is your Sport Trac?
- 2n Gen Owner
Mike.... you 2wd ??? There are NUTS and bearings and seals UNDER the center cap on the rotor....Remove the cap in the center...
2wd is different from 4wd...
Todd Z
2wd is different from 4wd...
Todd Z
Henry Suarez
Well-Known Member
Also some screws you can put in the rotor that help force the rotor out. They are the empty holes you'll see around the center.
- Joined
- Sep 21, 2003
- Messages
- 22,366
- Reaction score
- 752
- Location
- Long Island, NY
- What engine do you have?
- V8 engine
- What year is your Sport Trac?
- 2010
- What Generation is your Sport Trac?
- 2n Gen Owner
IF the OEM 4wd rotors I believe may have them from the factory holding on the rotor in the friont....
Phillips head screws.... OR those slide on clips on the studs..
Todd Z
Phillips head screws.... OR those slide on clips on the studs..
Todd Z
