elbow under throttle body

[james green]

im not exactly sure wich elbow im lookin for under the throttle body to check for the crack i see a few just behind and i just wanna make sure wich one it is before i start pulling hoses off

 

[Paul H]

Here is the elbow and the location.



Paul H



[Broken External Image]:



[Broken External Image]:

 

[Chris Cramer]

Paul

When you replaced that elbow. Did you order a factory one, and do you remember the cost of it?



Thanks.

 

[Paul H]

Actually when you order the elbow it comes with the entire tube which you should replace with it. Also you might as well change out the PCV valve while you are there...



Here is the part number, new and old from Ford....



Motorcraft # KCV - 190



NEW Ford # 4L5Z - 6758 - HA

OR

OLD Ford # 4L5E - 6K817 - HA



Ford changed the numbers as they updated the part..

This is the whole assembly, the front elbow is the one that cracks under the throttle body and the other elbow attach to the PCV valve...

The hose is easy to change...



[Broken External Image]:



Paul H

 

[tom buczkowski]

I just got one last week, 34.95

 

[Chris Cramer]

thanks alot guys..

 

[J Piroth]

Go ahead and change out the PCV valve while you're in there. It's not very expensive, and there's a project on it in the projects section.

 

[mike ricketts]

I have now found the same problem on my 2002 thanks to another member emailing me the pictures.

 

[Jim parnell]

I have one that I will sell, entire tube assembly, new, never installed will fit an 02 ST, $25 shipped. email me @ profile addy