So, the steering wheel switches on my Trac have been shot for a while now. The left On/Off switch was cracked to hell, the other was just faded & funky. So, I replaced them. The new switches look great, but the cruise control isn't working.
The On/Off switch seems to be functioning properly, because i can only operate the other Set/Resume/Coast switch once I've turned it on. The green cruise control light comes on when I hit the Set button. Then...nothing. It's not controlling the speed of the Trac at all. Won't hold it at speed, can't accel by holding that down and can't decel by holding coast.
After reading through posts, I checked the two 2 amp fuses in the bypass Ford installed after the recall and those are both clean and intact.
Where should I look next?
The On/Off switch seems to be functioning properly, because i can only operate the other Set/Resume/Coast switch once I've turned it on. The green cruise control light comes on when I hit the Set button. Then...nothing. It's not controlling the speed of the Trac at all. Won't hold it at speed, can't accel by holding that down and can't decel by holding coast.
After reading through posts, I checked the two 2 amp fuses in the bypass Ford installed after the recall and those are both clean and intact.
Where should I look next?