LOUIS CERBONE
Member
ran scan and pulled a p0301 code today. I ran it yesterday and it came up with p0401 code and i changed the dfpe sensor this morning. Hwen i ran the scan again it came up with p0401 and p0301? any thoughts
codes
- Thread starter LOUIS CERBONE
- Start date
Help Support Ford SportTrac Forum:
- Joined
- Sep 21, 2003
- Messages
- 22,366
- Reaction score
- 752
- Location
- Long Island, NY
- What engine do you have?
- V8 engine
- What year is your Sport Trac?
- 2010
- What Generation is your Sport Trac?
- 2n Gen Owner
P0301 Cylinder #1 Misfire Detected
P0401 EGR Flow Insufficient Detected
Check the Elbow first, and clear the codes by disconnecting the neg cable on the battery...
Todd Z
P0401 EGR Flow Insufficient Detected
Check the Elbow first, and clear the codes by disconnecting the neg cable on the battery...
Todd Z
Last edited by a moderator:
LOUIS CERBONE
Member
the elbow? any pics?
Tommy VanNess
Well-Known Member
I might have one. Hang on a sec.
Yep, here it is... I had the same problem. Good luck, hope it helps.
[Broken External Image]:
Tommy
Yep, here it is... I had the same problem. Good luck, hope it helps.
[Broken External Image]:
Tommy
Last edited by a moderator:
LOUIS CERBONE
Member
yes that elbow was cracked a while back and I changed it out already. thanks for the pic
- Joined
- Sep 21, 2003
- Messages
- 22,366
- Reaction score
- 752
- Location
- Long Island, NY
- What engine do you have?
- V8 engine
- What year is your Sport Trac?
- 2010
- What Generation is your Sport Trac?
- 2n Gen Owner
What did you change it with ??? Check it any way....
Heater hose will soften over time...
Todd Z
Heater hose will soften over time...
Todd Z
