J Jim Vidmar Member Joined Aug 25, 2003 Messages 8 Reaction score 0 Location norman, OK May 2, 2007 #1 I have CEL Code P0401 and keep blowing fuse #17 (20 amp) in the driver side fuse panel? Could this be the DPFE/EGR Valve Pressure Sensor? Thanks~ Jim
I have CEL Code P0401 and keep blowing fuse #17 (20 amp) in the driver side fuse panel? Could this be the DPFE/EGR Valve Pressure Sensor? Thanks~ Jim
Todd Z Well-Known Member 4 wheel drive 2nd Gen owner V8 Engine Joined Sep 21, 2003 Messages 22,366 Reaction score 752 Location Long Island, NY What engine do you have? V8 engine What year is your Sport Trac? 2010 What Generation is your Sport Trac? 2n Gen Owner May 2, 2007 #2 replace the DPFE sensor, as for the fuse, I believe the 20 amp fuse is for the Fuel pump... Todd Z
J Jim Vidmar Member Joined Aug 25, 2003 Messages 8 Reaction score 0 Location norman, OK May 2, 2007 #3 Thanks Todd! Is there a cross-reference available somewhere that can tell me what #17 is actually controlling? Take care~ JIM
Thanks Todd! Is there a cross-reference available somewhere that can tell me what #17 is actually controlling? Take care~ JIM
Todd Z Well-Known Member 4 wheel drive 2nd Gen owner V8 Engine Joined Sep 21, 2003 Messages 22,366 Reaction score 752 Location Long Island, NY What engine do you have? V8 engine What year is your Sport Trac? 2010 What Generation is your Sport Trac? 2n Gen Owner May 2, 2007 #4 The fuse is for the cigarette lighter and the OBD port... SO check your horn, Cigarette lighter and that stuff... Todd Z
The fuse is for the cigarette lighter and the OBD port... SO check your horn, Cigarette lighter and that stuff... Todd Z
B Bill Ellis Well-Known Member Joined Mar 23, 2004 Messages 935 Reaction score 0 Location Florissant, MO May 2, 2007 #5 Remove radio bezel and check to see if cig lighter wire came loose. Make sure it's installed. Remove lighter, put in new fuse. Try lighter and see if that blows fuse.
Remove radio bezel and check to see if cig lighter wire came loose. Make sure it's installed. Remove lighter, put in new fuse. Try lighter and see if that blows fuse.
J Jeffksf B Well-Known Member Joined Feb 20, 2007 Messages 772 Reaction score 2 Location Cleveland , OH May 2, 2007 #6 I had the 401 CEL code , I replaced my DPFE ($33 at NAPA) and so far so good on the code (knocking on wood)
I had the 401 CEL code , I replaced my DPFE ($33 at NAPA) and so far so good on the code (knocking on wood)
J Jim Vidmar Member Joined Aug 25, 2003 Messages 8 Reaction score 0 Location norman, OK May 2, 2007 #7 Thanks guys! The lighter has not worked for some time, so I will check that out first! Have a good day! Jim
Thanks guys! The lighter has not worked for some time, so I will check that out first! Have a good day! Jim