Antenna Broke

[Freshwiler 2002]

I broke my antenna the other day. The metal piece that is inserted to the plastic external covering on the fender broke off way down inside. The threaded piece of the metal connector is still in the hole, therefore I can't get a replacement in. Any suggestions?



I assume that I need to remove the inner fender lining and disassemble the whole thing? thanks again

 

[Todd Z]

Remove the bezel on the outside, It is held on with two screws from the out side....



I remember tighten one on a ST one day.... thats how we did it....



Should be able to remove it from there...



But if the piece is still in there, you may be able to use an easy out to remove it...



Todd Z

 

[Bill Barber]

Todd

What two screws on the outside of the bezel?

 

[Todd Z]

I think they were under the bezel.... pop off the bezel and they were under there....



Todd Z

 

[Darrell F]

This is a diagram in addition to what Todd Z already said. Hope this helps

 

[JerryW Gilliland]

Great find, Trunk!

 

[Darrell F]

Thanks Jerry. Glad to help.

 

[Freshwiler 2002]

This is very helpful.. Thanks alot