Alignment specs, are the right?

[Derek F]

Put on my 22" wheels this weekend. Just got back from picking the truck up at the alignment shop. I had a set of adjustment specs I had found from researching on here on what the sport trac should be set to.



In comparison the shop's print out reads differently and I am not real sure how to interpret them to varify they are correct. Can anyone help me out?



The specs I found posted here are:



Front Camber: -0.5º ± 0.7º

Front Caster: LH 3.15º ± 1.0º

RH 4.05º ± 1.0º

Total Toe: 0.12º ± 0.25º



The specs listed EXACTLY as they show on the paperwork I got:



After:

Camber Left: + 1/4 Right: 0

Caster Left: + 4 Right: + 4 1/8

TOE: In 1/8"



Is this correct??

Thanks!

 

[Todd Z]

1/4 is .25

4 is 4 and 1/8 is .125

1/8 is .125



SO your in specs, Too bad you don't have the adjustable uppers so they can fix the caster, BUT good + caster will help self center the steering wheel when you let go.



You should be good to go...

Todd Z

 

[Derek F]

Sweet thanks Todd!



Just wanted to make sure. The place is very reputable but i just wanted to double check!



The camber adjuster install wasn't too bad either. In fact I wrote a project up for it and submitted it. Hopefully it will get put up soon!



Now if I can figure out this accu-speed module to correct the shift pattern & speedo I will be good to go!