Search results

anyone know where i can order the seat cushion/ of foam? i was able to remove the leather cover and all, the foam has flattened out a bit, the leather is ok...

....shucks, i was hoping to save me a trip under the trac! looks like i gotta dive in ... thanks todd was wondering why the project on how to change the fuel filter showed a diffrent one...

hi guys, i have not seen our tracs fuel filter, is this the right part? http://198.208.187.182/internet/PartImage.jsp?mfgname=ACDELCO&prodlinecd=47&acpartnbr=GF832 thanks in advance,

happened to me too last year or so, just like todd says, check the thin hose running from the cap to the bottom of the resevior bottle. mine was loose so i just put a small hose clamp around it....:D

thanks todd, any idea where i can get upper arms online cheap? and are the Spicer brand bushings good?

i just want to ask if the upper control arm bushings (one pair per side) can be replaced or is the whole upper a arm replaced if the bushings are shot just like when they replaced the upper ball joints...

thanks todd, i have a 01 job 2. i did not notice the black seal?:huh:

nope... no hard starting issues...

many months ago my idling would be on the 500rpm mark and would dip below it for half a sec then go to 500 then go down after half a sec ect,ect. this was very obvious at night when i have the lights and ac on and on a stoplight with my foot on the brake and tranny on drive i have cleaned...

thanks for the inputs, found a castrol mercV although its the same price as the one in the dealer so trac is with the dealer now...

hello !!! just want to know if this brand is ok.... m about to change tranns fluid and this is what is available. thanks

ok thanks todd !:D

pardon my ignorance but how many camber bolts per side? because i see that the upper a arms are attached to the frame via two bolts....do i replace both with camber bolts so a total of four bolts for both sides??? 1. a camber kit contains one bolt or two?... 2.is there a preference...

how many washers will i need or if i choose the bolts, how many bolts?:)

with a 2001 job2 ST do i order the complete camber kit or just some washers i read about??? i did a lift via TT....

dumb question:huh: how many bolts do i need?

hi guys, i have a 2001 job 2 and did a TT and alingment almost a year ago. at that time the shop said camber was maxed out but was within specs... thinking of installing camber alignment bolts because uneven tire wear in begining to show... is this what i need? the one from...

anyone using this tire? mine is about 40% worn and there is a slight buzzing sound when travelling around 20-30 m/h. no cupping, front bearings replaced 10k miles ago....

thanks jason, so i guess the dueller at revos would be a better tire than the mastercraft htrs?

anyone using this brand on their trac ? i dont see them on the tirerack list of reviews http://www.mastercrafttires.com/us/en/ProductDetails.asp?ProdType=LtTruck&id=86&title=Light+Truck+Tires