Search results

While driving on the freeway over the weekend my temp gauge would periodically jump up to high and the check gauge light would come on for about 3-4 seconds and then return to normal for about 5 minutes. Other than the gauge moving, the truck seem to run the same and there was no noticeable...

I have a 2003 4x2 with a spindle/leaf spring lift with 33" tires. I have had my wheels rotated/ balanced and also have had a front end alignment after replacing the camber washers. I still have a vibration when traveling between 60-70 mph. Any suggestions? I read the previous posts about...

Does anyone have a set (or even just one) headlight that they no longer need? Thanks.:D

Items for sale: 1) Set of 4 Goodyear Wrangler RT/S P255/70R16 with approx. 1/4in tread. 2) 2003 Stock Rims 3) Ram Side Trax step bars, black, for 2003 Sport trac, Have almost all hardware, only missing retaining clips. I am trying to sell locally(located in lubbock, tx) so that...

I am looking to buy a set of 2003 stock headlights! Anyone got some laying around? Thanks

I am retrofitting some bixenon projector headlights into my trac. I have a new harness to preplace the stock 9007 harness. Anyone know where the harness plug is located? I think that it is located somewhere on the driver side but need more specific location. Thanks in advance. MCbrainz

I am looking to aquire some clear corners for my 2003 trac. anyone got some laying around that they would like to part with? Thanks.:D

Does anyone know offhand the dimensions for the stock headlight housing for the 2003 trac? I am planning on doing a HID retrofit and need to make sure i will have enough clearance for the projectors. thanks.

I am trying to decide whether I should go with a tonnaeu cover or bed cap. Can some of you guys show some pics so I can get a feel for the various looks. Thanks in advance. Mcbrainz

Just installed the fabtech lift spindles, now i have experienced a strange brake problem. Whenever I turn sharply to the left or go over a curb, my brake pedal will go to the floor for the next pump of the brakes, and then the next pump will react normally. Luckily i havent had to stop...

I just installed the fabtech lift spindles and now my front tires stick out past the fender. I would like to make the rear wheels match. Anyone reccomend somewhere to order some wheel spacers? and what is the max spacing while still being safe? pics of new installed parts to follow after...

I am installing my fabtech lift spindles today and I have a few questions. First, i know the instructions are for a 2001 Ranger Edge, so how closely do i have to follow the modification steps? for example, do i have to cut off the steering block from the lower control arm, and also, do i have...

Finally got the time this weekend to install my lift spindles and new rear leaf springs with my new wheels and tires!! I was reading the instructions for the fabtech spindle install, and it was mentioning using a grinder to modify the upper control arm?? Is this necessary for the Trac or were...

Anyone here know any insider information on when fabtech will start shipping their spindles again? I ordered some spindles at the end of july and have yet to recieve them. I spoke to several truck shops and they all say the hold up is at fabtech. Cant wait to lift my trac!

I finally have a weekend free and all my parts to complete my 2wd lift....EXCEPT my fabtech lift spindles!! I have contacted the place that I ordered them from and they have called fabtech and were told that they are a few weeks backed up. Does anyone know of any shop or online store that...

I am planning on putting the lift spindles with a torsion twist in the front with the superlift 4" lift springs in the rear. I would also like to replace all the shocks with some Rancho RSX. I placed an order on Sam's Offroad website and recently got an email saying that they did not carry a...

I just recieved my leaf springs for my upcoming lift and I noticed that they did not come with bushings. Is this normal or did they forget to include them in the shipment? If I was not suppose to get the bushings with my leaf springs, does anyone reccomend and know the part number for some...

Anyone have experience with the Addco rear sway bar. I found a deal on the internet selling the front and rear sway bar as a package. I would save a good chunk of change than if i ordered the EE rear sway bar and the addco front separately. the addco rear is only 1" while the ee is 1.125"...

I am collecting all the parts to do my 2wd lift. I know i need the 11.25" rotors from the 2001 Ranger edge. Exactly which engine type and other info do i need to tell the person at autozone in order to get the right rotor? Also, the rotor and bearings are one part on the 2WD's, right? Thanks.

I have researched past threads on this topic and there did not seem to be a definitive answer. Can anyone say with certainty if longer shocks are needed for a 2003 2WD with 3" lift spindles/TT/4"rear springs/shackle lift.?