anyone know where i can order the seat cushion/ of foam? i was able to remove the leather cover and all, the foam has flattened out a bit, the leather is ok...
....shucks, i was hoping to save me a trip under the trac! looks like i gotta dive in ... thanks todd
was wondering why the project on how to change the fuel filter showed a diffrent one...
hi guys, i have not seen our tracs fuel filter, is this the right part?
http://198.208.187.182/internet/PartImage.jsp?mfgname=ACDELCO&prodlinecd=47&acpartnbr=GF832
thanks in advance,
happened to me too last year or so, just like todd says, check the thin hose running from the cap to the bottom of the resevior bottle. mine was loose so i just put a small hose clamp around it....:D
i just want to ask if the upper control arm bushings (one pair per side) can be replaced or is the whole upper a arm replaced if the bushings are shot just like when they replaced the upper ball joints...
many months ago my idling would be on the 500rpm mark and would dip below it for half a sec then go to 500 then go down after half a sec ect,ect. this was very obvious at night when i have the lights and ac on and on a stoplight with my foot on the brake and tranny on drive
i have cleaned...
pardon my ignorance but how many camber bolts per side? because i see that the upper a arms are attached to the frame via two bolts....do i replace both with camber bolts so a total of four bolts for both sides???
1. a camber kit contains one bolt or two?...
2.is there a preference...