Robert Caffyn
Well-Known Member
When you did the Brembo kit, was that made for a Mustang? Did you have to alter or adapt anything to make it work? Bolt in? Wheel clearance? What about the rears? Thanks for any help, Bob
**SuperCharged SVT** got a question
- Thread starter Robert Caffyn
- Start date
Help Support Ford SportTrac Forum:
Henry Suarez
Well-Known Member
He's ignoring us Bob, Cause I am on pins and needles waiting for his responce. I hate my brakes too!
not ignoring - if you search Caliper Covers on the site and you will see that I have been very forward -
[Broken External Image]:
Henry Suarez
Well-Known Member
JK, did you have to make special adaptations to hold the Brembo's.
NYJohn
Active Member
"not ignoring - if you search Caliper Covers on the site and you will see that I have been very forward - "
do you speak to people like this in real life?
do you speak to people like this in real life?
really, I have said it lots of times - there are threads on this - They are R1 Concept Rotors, Ceramic Pads, and Covers - No One Makes a Bracket for the Explorer to Add Brembo's -
The only cure that we found was High Heat Ceramic pads that grind your machine to a stop, and adequate rotors to handle the high heat generated by the friction -
nyjohn - do you really ask questions that have been answered for 11 months?
See the listing below - this is the one
The only cure that we found was High Heat Ceramic pads that grind your machine to a stop, and adequate rotors to handle the high heat generated by the friction -
nyjohn - do you really ask questions that have been answered for 11 months?
See the listing below - this is the one
