Joe Johnson
Member
My shifter is sticking slightly when I go from park to reverse and then to drive. Any ideas as to what could be happening?:angry:
Shifter Trouble
- Thread starter Joe Johnson
- Start date
Help Support Ford SportTrac Forum:
- Joined
- Dec 23, 2006
- Messages
- 1,873
- Reaction score
- 65
- What engine do you have?
- V8 engine
- What year is your Sport Trac?
- 2007
- What Generation is your Sport Trac?
- 2n Gen Owner
There was a TSB on this and I had mine fixed under warranty....no issues since
Henry Suarez
Well-Known Member
Just wait till that stupid little pin falls out of the shifter. Then you'll really love that crap Ford put in.
- Joined
- Dec 23, 2006
- Messages
- 1,873
- Reaction score
- 65
- What engine do you have?
- V8 engine
- What year is your Sport Trac?
- 2007
- What Generation is your Sport Trac?
- 2n Gen Owner
CopSTA......Any pics of where that little pin is so I can take a look see if there's a way to keep it where it's supposed to be?
Henry Suarez
Well-Known Member
No sorry, Its a small 1 inch black pin that becomes unglued and slides out horizontally. Its the one that, when it slides out, you can't take your key out of the ignition and your shifter doesn't lock into position.
Joe Johnson
Member
Can you tell me more about the TSB on this, I can't find it
Jim Mills
Member
The part causing your problem is called the park detect switch. It runs about $30 from Ford. Its under the console on the passenger side, it took me about 30 mins to replace it. I tried the TSB, but it expired in 2011. The part # was 9L2Z-7J437-B in case they have trouble finding it. Good Luck.
