removing airbox silencer...

[Andy Szkutak]

i hear that with my k and n filter if i take out the airbox silencer out of the airbox ill get more out of the k and n...can anyone walk me through the process of removing it please? im afraid ill screw something up again and end up costing me a ton...



thanks

andy

 

[Jeff C]

There's a project on how to do it. I was one of the first things I did, but then I got an aftermarket intake. Basically, take the box apart, and pull out that little tube that's in the front of the air box. I think I took my head light out (passenger side that is) and it was somewhat easier. Cheapest performance mod out there. You should notice a little exhaust change, not much, and you may notice a sucking sound too, but it won't be too loud or noticable.

 

[Robert Stanton]

Here are the projects you're looking for:



http://www.mysporttrac.com/mysporttrac/projects/AirBox2/AirSilencerRemoval.htm



http://www.mysporttrac.com/mysporttrac/projects/RemovingtheIntakeSilencer.doc

 

[mike oyler]

Here it is in a link,

 

[TJ Tatum]

andy szkutak

I just did the same mod this Saturday. I found it much faster and easier to remove the headlight.(don't forget to plug it back in when your done, unlike me) I have noticed a little bit of noise but not much, but i like the sound that it does make. You can't screw this up its very simple. Good luck and have fun!

 

[roger Biddlecombe]

Dont bother removing box just use a hole saw & carefully cut 3 2in holes in sides,that will give you all the air the filter can handle,it works well & apears standard,gives slight roar on hard acceleration