relay question

[Julio R]

i plan on putting a set of driving lights over the weekend i had a question i have a bosch relay i plan on using the accessory block so i dont have to touch the battery if i understand correctly main power would go from the accessory block to pin 30 of the relay the lights would get hooked up to pin 87 the switch i am using is marked earth, load and supply, i know earth is ground but am not sure how to hook up the other 2 to the relay help would be greatly appreciated

 

[Steve McKellop]

The SWITCH is marked EARTH LOAD SUPPLY?

earth = ground (85)

load = relay trigger (86)

supply = 12v (30/51)

 

[Julio R]

thanks for the pic, yeah the switch marked with earth, load and suply

 

[Yardsale]

Earth=ground

Supply=battery

Load=device (lights).



The battery provides the electric source, the lights are the load on the battery and the ground is the earth.

 

[Julio R]

thanks for the info unfortunately i had to hold off on the project, i had originally got a carr light wing to mount the lights but i couldn't get it mounted in a way that looked good anyone have any good suggestions for mounting lights?