Bo Loo
Well-Known Member
I recently painted the cladding and nerf bars and I also took the opportunity to replace the cruise control switches due to the plastic coming off.
During that process, I inadvertently attached the wire connector upside down to the On/Off switch.
This had a "curious" effect. Once the airbag was installed, the horn stayed on. If the airbag was removed, the horn would also honk if I pressed the cruise control off button.
Before
[Broken External Image]:
After
[Broken External Image]:
[Broken External Image]:
During that process, I inadvertently attached the wire connector upside down to the On/Off switch.
This had a "curious" effect. Once the airbag was installed, the horn stayed on. If the airbag was removed, the horn would also honk if I pressed the cruise control off button.
Before
[Broken External Image]:
After
[Broken External Image]:
[Broken External Image]:
Last edited by a moderator: