Thomas Clark
Active Member
I start with a bank 1 and bank 2 too lean back on mothers day,,
I changed the Vacuum elbow and the O2sensors,, Everything was fine.
Then I got the P0401 (think) a couple of weeks ago,,
put in a new DPFE unit and it the CEL was quite for like a week,
Now it comes on and goes off code reads P0402,
I took the EGR valve off and it is very clean,, I flushed and tested and it seem to work perfect.
I could find no blockage in the tubes under the DPFE or where the EFR valve is hooked up.
the sitcker date is 11/01
I changed the Vacuum elbow and the O2sensors,, Everything was fine.
Then I got the P0401 (think) a couple of weeks ago,,
put in a new DPFE unit and it the CEL was quite for like a week,
Now it comes on and goes off code reads P0402,
I took the EGR valve off and it is very clean,, I flushed and tested and it seem to work perfect.
I could find no blockage in the tubes under the DPFE or where the EFR valve is hooked up.
the sitcker date is 11/01