1. Welcome to the new home for MySportTrac.com!

    Please click here to find all the info about the move to the new site!

    To access your account you will need to reset your password here

fixing window

Thread in 'Interior' started by Donald Gregory 2, Mar 25, 2017.

  1. Donald Gregory 2

    Donald Gregory 2 Member 1st Gen Owner V6 Engine

    Messages:
    4
    Likes Received:
    0
    Joined:
    Jan 11, 2014
    Location:
    Antrim, NH
    this winter the drivers side window came off the regulator and is down in the door.I took the interior door panel off i was wondering if i can re glue the window to the regulator and what kind of glue do you suggest :back2topic::back2topic::back2topic:
     
  2. A1cntrler

    A1cntrler Well-Known Member 1st Gen Owner 2nd Gen Owner 4 Wheel Drive V8 Engine

    Messages:
    1,354
    Likes Received:
    1
    Joined:
    Oct 16, 2001
    Location:
    Moorpark, CA
    3M makes a product called window weld. You can either buy it online or most auto part stores carry it. There's also a primer available that you should use as well. Try to remove as much of the old adhesive as you can and if you're able to clamp the window to the regulator while it cures. If you can't clamp it maybe roll it up all the way while it cures so it's held in place.



     

Share This Page