Didn't want to spend to replace a switch that was still working. Didn't want to remove the air bag. These cruise switches have plastic tabs that break off and leave them hanging by the harness. A little L bracket, a small screw, and some epoxy made it nice and tight. A very small amount of epoxy at the broken part of tab ends also, not enough to be a problem if removed later. A little ugly to look at but you have to be at a certain angle to even notice it.
[Broken External Image]:[Broken External Image]:[Broken External Image]:
[Broken External Image]:[Broken External Image]:[Broken External Image]:
Last edited by a moderator:
