David Vinson
Member
Once the hood is raised, locate the screw that holds the corner lens in place as illustrated in the picture. Remove the screw.
Next, pull the lens straight out from the front.
Now, remove the harness from the stock housing by turning counter-clockwise.
Replace stock housing with new clear housing. Line up the tabs with the slots in the housing and resecure by turning the harness clockwise. Reseat new housing in place by pushing it straight back, opposite of how the original was removed. Refasten the screw. Repeat steps to complete the other side.
You're finished! Stand back and admire the cleaner look of your ST.
Next, pull the lens straight out from the front.
Now, remove the harness from the stock housing by turning counter-clockwise.
Replace stock housing with new clear housing. Line up the tabs with the slots in the housing and resecure by turning the harness clockwise. Reseat new housing in place by pushing it straight back, opposite of how the original was removed. Refasten the screw. Repeat steps to complete the other side.
You're finished! Stand back and admire the cleaner look of your ST.
Last edited by a moderator:
