Check Engine Light

[Bradley Bliton]

I installed a volant cai, zabteck throttle body, screamin demon ignition coil pack, livewires, and bosch iridium fusion spark plugs. My check engine light came on and I had it checked. I had three codes:



P0171 - lean fuel #1

P0174 - lean fuel #2

P0300 - misfire



I think when I installed the plug wires I mixed up 2 and 3. Can I get a check on which wire goes where so I can switch the wires if I need to. And can get help on the other codes. Thanks y'all.

 

[Tom Schindler]

Lean 1 and 2 means you have something open. i.e. that hole.



Misfire means you are having misfire problems. gimmick plugs?



Mixed 2 and 3 should ID those two cyliners with code numbers P0302 and P0303. The coil should tell you which wire goes where.





Tom

 

[Paul H]

Here is a link that will help you with those codes...check the infamous cracked elbow problem.

You had stated in a previous post that there was a problem with your Trac running a little rough before these mods. Good luck,

Paul H



EDIT: Thanks Coastie, did not notice that the picture did not work in the link...

 

[Kevin Palmer]

USAF, here is the elbow refered to...



[Broken External Image]:



[Broken External Image]: