Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
SportTrac Discussion
General Sport Trac Discussion
Brake controller install
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Ford SportTrac Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Don Tomczak" data-source="post: 743717" data-attributes="member: 65250"><p>I just put mine in. I bought a Prodigy brake controller. The controller is easy to install. For mine the red wire went to the switched side of the brake pedal(the wire that only has voltage when you step on the brakes), a black wire for power. I added a 30 amp auto reset circuit breaker. A white wire for grounding. And a blue wire to give the braking signal to the trailer. On the 7 spade side it had the brown, yellow, and green wires that were conected to the exsistig 4way for tail and turn signals. White for chasis ground. Purple for reverse lights. Black for 12 volt source.( here I used a 87a relay that used a swited signal source from the ignition and the 12 volt source was taken from the in bed cigerete lighter thing. And a blue wire that connected to the blue wire from the brake controller. Let me know if you need any picturs to help you out.</p></blockquote><p></p>
[QUOTE="Don Tomczak, post: 743717, member: 65250"] I just put mine in. I bought a Prodigy brake controller. The controller is easy to install. For mine the red wire went to the switched side of the brake pedal(the wire that only has voltage when you step on the brakes), a black wire for power. I added a 30 amp auto reset circuit breaker. A white wire for grounding. And a blue wire to give the braking signal to the trailer. On the 7 spade side it had the brown, yellow, and green wires that were conected to the exsistig 4way for tail and turn signals. White for chasis ground. Purple for reverse lights. Black for 12 volt source.( here I used a 87a relay that used a swited signal source from the ignition and the 12 volt source was taken from the in bed cigerete lighter thing. And a blue wire that connected to the blue wire from the brake controller. Let me know if you need any picturs to help you out. [/QUOTE]
Insert quotes…
Verification
Post reply
SportTrac Discussion
General Sport Trac Discussion
Brake controller install
Top