swap interior parts ??

what interior can use in the 05 sport trac ? could I use any explore or ranger parts ?

Most interior parts in the 3rd gen rangers, 2nd gen explorers, and 1st gen sport tracs are interchangeable with some minor modifications. Heres a how-to on a console swap.

i need seats some how the person before me crushed them and you just lean hard to one side on both sides

The broken plastic piece on the side of the seat is a common problem for these trucks. Unfortunately, theyre hard to find and as far as i know are sport trac specific. I would try to replace the entire seat. Im not sure if an explorer or ranger seat will fit. I have the original seats in my truck, but i recently replaced the drivers side foam with foam from an explorer sport passenger seat. Maybe someone else will chime in who knows what seats are compatible.

95-00 explorers might fit. At least very close.

I would try and find an undamaged seat cushion as well just like @SwapTrac mentioned.

mr.iluv5layers said:

i need seats some how the person before me crushed them and you just lean hard to one side on both sides

Click to expand...

If you're missing the center console bag, I have one I can send you.

parker_lansing said:

If you're missing the center console bag, I have one I can send you.

Click to expand...

there is a bag ?

mr.iluv5layers said:

there is a bag ?

Click to expand...

I can't quite tell from your photo because there is a sheet of paper in the way, but it looks like the original style console that had the removable cargo bag.

parker_lansing said:

I can't quite tell from your photo because there is a sheet of paper in the way, but it looks like the original style console that had the removable cargo bag.

Click to expand...

I didnt know they had a bag

mr.iluv5layers said:

I didnt know they had a bag

Click to expand...

Can you send a clearer shot of your console, without anything in the way?

I have a cargo bag and a cup holder liner that I'm willing to part with. They were part of a lot that I bought months ago. I only needed a few things, and I'd be happy to ship these at no cost if you can use them.

Most plastic body parts are getting very scarce and some times can only be found in well stocked salvage yards, ePay, or sites like car-part.com or Hollander Parts.

@mr.iluv5layers
Your 2005 XLS center console is missing the soft bag. They can still be found used but expect to pay $50 or more for one in good condition. Your OE console lids plastic bracket appears intact which is surprising. It's not supported or braced and any amount of weight on them will usually snap the bracket. Made that mistake adjusting my manual passenger mirror from the driver seat. I'm NOT a fan of Dorman products, but the Dorman 924-834 metal replacement bracket is probably the best product I've ever bought from them. Click link below.
https://www.amazon.com/Dorman-924-8...MI4vT3s-3LgwMV-hGtBh2OfQBFEAQYASABEgJuW_D_BwE

01-02 then 03-05 - Changes were made but you may be able to get all the needed part sot make it work.

2nd Gen Explorer ('95-'01 and '01-02 2 dr Sports) seats bolt right in, but the fabric is different. The seats with adjustable headrests are specific to the Sport Tracs and '01 to '03 Sports, I think. I think Explorer seats all the way back to the '89 Bronco II will bolt in. Most all Ford seats going back to the early 90s, maybe even into the '80s, have the same bolt spacing on the seat frame. The tracks that mount to the floor will be different.