4.0 liter is really hard to purge of air. I always had trouble purging it. They sell a vacuum purger which would make it easier, but I used the big radiator fill funnel they sell at Harbor Freight (cheap) and other places. Don’t overfill the funnel during the process because then it becomes a...
Hi David, Yes they are still available. If you would like them, you will need to pick them up (Hillsboro, OR), as I don't have a way to transport them. I am happy to give them to a new Sport Trac. Send me a private message if you are interested in picking them up.
Thanks, Steve
I broke one lug nut cover off of my 1990 Ranger while changing a tire in a foot of snow while going over a pass. Was not happy that the tire wrench did not fit the bolt size under the pretty chrome cap. Fortunately my wife suggested I use the large vice grips in the tool box. I was skeptical...
I said goodbye to my 2001 Sport Trac with 127K miles. Purchased it used in 2005 as we needed a truck with a back seat for our baby daughter's car seat. In August we took the Sport Trac on a 2,800 mile road trip to Colorado to drop her off at college. Along the way, someone backed into the...
Available in Hillsboro Oregon:
Sport Trac Gen 1 Factory Tonneau Cover with brackets and keys. Cover is faded, but in good shape. One of the knobs that stores the bungee cord has broken off.
Sport Trac Gen 1 Factory Bed Divider - Good condition.
They are off of my 2001 Sport Trac. I will...
Like Tim asked, can you provide more detail about the situation when it stalls? Driving down the road at partial throttle? When idling? Going around turns? Right after starting? Does it start back up after stalling? Also, do you have any stored trouble codes or check engine light...
Now Blert, you are such a social influencer. I’ve replaced most of the usual suspects on my 2001, but the plug wires are still original. Only 121K miles, but the age! Guess the wires are next!
Hi Dillard! You are a database for sure! The missing bolts I want to replace are on the upper “girdle”. I think I have narrowed down the search to a couple of possible sizes based on the website swshawaii pointed me to.
Thank you swshawaii. I bookmarked the FPG site for future reference. Very helpful, although in this case it has only narrowed down the size selection. Will probably head to the hardware store next and buy a few different options. M8 x 45 mm or M6x20 mm is my guess now.
So, while crawling under my truck working on the heater control valve and hoses, I noticed that I appear to be missing two UPPER oil pan bolts. May explain (some) of the oil leaks. Location is the front passenger side. The corner bolt is there, but there are two missing adjacent to it on...
Hi people! I think the heater hose that goes from my water pump to the heater control valve is leaking. It looks like it is at the connection to the water pump. The leak started yesterday, and we were lucky to see it dripping before we drove away. Need some advise and assurance to get me...
In these old trucks, it is good to worry about the “frozen nuts and bolts”, and use plenty of PB Blaster etc. My additional concern on the 2001 Gen 1 Job 1 engine that I have, is the plastic upper intake manifold- the one that looks like a pretzel. It attaches to the lower plastic intake...