Mark Stadnicki
Well-Known Member
My 2010 V6 Limited with auto HVAC has no blower fan at all in auto or manual modes. I replaced the fan resistor and the same. Pulled the fan a bench tested with 12VDC, it fired up and spun freely. I ran a EATC test and it made it to all LED segments on and that's it, no DTC's. I exited test and you could hear all doors resetting. I did hear clicking when I would select modes and found that to be the vacuum control module 1L2H-19D611-AB, Ford does not list part anymore, but I don't think it would cause a no fan condition... at a loss now