bed extender?

Ford SportTrac Forum

Help Support Ford SportTrac Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

john saylor

Member
Joined
Feb 16, 2017
Messages
7
Reaction score
0
Location
richland, OR
have a 2007 SP with factory tonneau cover, would like to replace with a roll up access lite rider, I don't currently have a bed extender but would like to find one.The new mounting for the bed cover will intrude 3 inches inside the bed, my question is will the bed extender clear my new mounting? Anyone that has a bed extender could rotate and see if it's 3 inches or more from the side rails.

Thanks
 
bottom of my 08 latches for factory tonneau sit 4" below top edge of bed..

Bars for extender are 1 1/2 inboard of inner wall at mounting point and angle inward

center radius of tubing bend is 2 1/2" from extender pivot point..

If new mounting rails?? sit 4" below bed top edge and extend to tailgate you would have clearance problems.. If they mount higher then stock latches you May be OK..
 
Top