Search results

What is the correct part no. for the fuel injector for an 01 job 2. My injectors are blue but all the online parts catalogs show them in yellow. I want to make sure I am getting injectors for a job2 and not a job 1

I had the same problem when I changed my plugs. I found out that I cracked the #5 plug. So I changed the plug & still had the same problem. Turns out running with the cracked plug left a carbon track in the plug boot. Cleaned out the boot and it runs fine now. So if you find that you cracked a...

I painted mine to match my truck.[Broken External Image]:

Looking at my trailer light plug today I found two wires marked Aux CHMSL pwr and CHMSL ground. What are these wires for. Thank you for any help.

Check the rivet holding the power lock motor to the door (circled below). My passengers side was gone when I bought my trac and I fixed it when I figured it out, then just two weeks ago My drivers side rivet was gone. I fixed it with a 1/4"x20 bolt & nut.[Broken External Image]:

I added 1/4 can on Thursday and am changing the oil today (Saturday). I belive it needs a little time to work in the engine.

If it is not the spring problem check the rivit that holds the lock actuator, it is visible when you open the door right by the inner door panel just below the latch. My passenger door was broken when I bought my 01'. I repalced it with a very short 1/4"x20 bolt and nut. I just noticed a cuuple...

Jerry my drivers side front cat broke up and clogged up my main cat. I hollowed them all out and have not had the check engine light come on, it's been 9 months now. It acted just like yours is lagging and then running fine for a while untill I tried to pull a pop up camper then the main...

Yea, I tried my second key and disconnected the batt for 30 min.

I went for a ride to town today and stopped at the used car dealear where I bought my Trac.(they have a 2005 on the lot i wanted to look at, but it was 4x2 so I wasant intrested). When I got bact in my Trac it wouldn't start. I checked battery voltage and connections, all good. Then when I tried...

Rob that is kinda far for me to look at the truck, But only 10-15 min. from my sister's house I'll call her tomarrow and see if she is in MI if she is I'll have her look at it for you.

Where in MI is the truck if it's in mid-Mi mabe I could look at it for you.

I just pulled the trans. out of my 2001 this weekend and dropped it off to my buddys tranny shop Monday. He is going to do a complete rebuild including new solonoids and new converter for $900.00. He called me today and said other than the pan gasket it dosent look like the trans. has ever been...

Yea I have been waiting for the new Ailce in Chains :cool:

stonemiser, Did not know five finger death punch had a new cd out. Just listened to some of it .:cool: It will be on my mp3 player with The Way OF The Fist. That is the soundtrack in my ST right now.:cool:

It's 2" rigid electrical conduit.

They don't go flat very easily and if they do they are easier to drag around than full size tires. I have seen cars come back from the heat to the feature with only one back tire and still run competitively, with front wheel drive they just drag the back of the car around.

No offence George. I already upgraded all the front wheel studs to 5/8" and reinforced some other areas for the next race. Most of the other cars are Corsicas or Celebertys and I have the 3100 motor over their 2.5s. Midland will be on asphalt so this will be a new experience. like I said I am...

I took this [Broken External Image]: and turned it into this [Broken External Image]: [Broken External Image]: [Broken External Image]: [Broken External Image]: a front wheel drive figure-8 car. I had a blast for 10 laps before someone hit my front rim and my front tire came off. I...

Yea here in mid-Michigan we got about 10-12" friday and 4-5" last night but today the wind is blowing 20-25 mph and now i have 4-6' drifts all over my yard