Separate names with a comma.
Welcome to the new home for MySportTrac.com!
Please click here to find all the info about the move to the new site!
To access your account you will need to reset your password here
The Gen 2 is not that hard, But I would get a second opinion.... it could be just as simple as an inner tie rod and not the rack....you need flair...
Yeah, use fuel line...
welcome... keep us posted.
04 is digital
you can buy the "assembly" on line and plenty of vids showing how to replace.... its a little tricky but easy.
you have way too much going on there...lol
He doesn't / didn't support the site. He can be mentioned but is not preferred.
Don't think they are related.... the band could be cracked and just slipping, or it was just a fluke.... Drive it normally and see.
yes 100% complete.
OK go to rock auto and buy the complete assembly... on the 4x4 the 4.6 and the 4.0 4WD are exactly the same and the bearing is NOT serviceable....
Does it run ?? Just let it idle in neutral.
you can pull the rear drive shaft too and tie it up and be done with it.
Shipping is way too expensive...
You may have bad wheel bearings.... There is a camber extension kit they sell ( Rock auto) BUT I lifted my black truck dam near 3 " and never had...
Ok, let us know
Felpro would be my choice too.
Need the schematics or if its just a power feed you can run the relays and power.
The early 01 had issues with blowing the valve body gasket. It was a molded design to the spacer plate and would leak.
You can install the...
There really isn't updated anything.... 2007-2008 motors are having timing guide issues now.... Ford crappy planned obsolescence design.
Welcome, its a little slow here but great information !!
IT could have water in it and that's not compressible, thus causing high numbers.