Gen1 Restore

Ford SportTrac Forum

Help Support Ford SportTrac Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TexST

Member
Joined
Feb 1, 2019
Messages
5
Reaction score
9
Location
Dallas Texas
I enjoy saving these trucks and making them sharp. Sad I can't make a living at it.
greenhornet.jpg
40206203_10217056340550676_5249814843174682624_n.jpg
 
Those are some good looking gen1 Tracs. Nice to see there are still some out there in great condition
 
Paul, both tail lights and headlights look great with that blacked out look. I have the same looking black headlights made by SPPC on my '03 Sport. They looked fantastic when new and fitted well. I got them summertime of 2017 from Amazon and noticed they now look hazy on the headlight portions only. They never leaked. Other clear aftermarket headlights I have had, never hazed like that and so quickly.
I will need to replace these this Spring and wonder how yours look, and the build quality with the brand name. Thanks for the help. :)
 
So for those who are unaware, my Instagram name is rally_dude. My truck is at the electrician who is a good friend of mine. It's runs. I heard it for the 1st time since I bought it. Ok so it needed a bit of help with some started fluid but it cranked up. Now to continue along this path of progress.
 
Hey guys. Question, can anyone help here? So my truck started only with starter fluid and ran until it ran out. I did it a couple times and it sounds pretty good. Does anyone have any ideas what could be the problem? Ok so it's obvious it is a fuel problem. But how do I resolve it? Also, the inertia switch don't seem to be working.
 
I can drop a few things to check.

IAC valve dirty. Free and easy to clean. I use electronics cleaner and cotton swabs ("Q-Tip") to clean and follow with a drop or two of light oil where the shaft enters the solenoid. I clean it at about 30,000 mile intervals (when I change the fuel filter) or "as needed" which happened last year (hard to start and would not idle).

Replace Fuel filter. About $20.00 and easy (with the fuel line connector tool).

IAC valve faulty. About 20.00 to $80.00 depending on whether aftermarket or OEM, but easy. Mine is original with 275,000 miles.

Fuel pressure and volume. Free to check.

Electrical relating to fuel delivery.

Vacuum leak.

Fuel pressure regulator. I haven't heard much of these failing, but maybe.

Fuel pump. Prices vary greatly. Kind of a pain to replace.

MAF sensor dirty or faulty. Inexpensive cleaner 30.00 to $60.00 to replace and easy.

That's it for now.
 
Hi guys. 2 things. First off, please take a look at these items an confirm the price in total please. All upper and lower intake manifold seals also known as gaskets. EGR tube O ring. All fuel injector O rings. Fuel injector adapter seals. Crank case breather seal. Both sides valve cover gaskets and the O rings for the bolts for the same valve covers. PCV valve. I have a 2002 4x4 model. I was quoted a price of $247us. Is that correct?
 
Hi guys. Secondly, I dropped the tank of my truck this evening in the rain. It wasn't as easy as I've seen in the videos on YouTube. Anyway, I got it off. Look at this. Is there something missing? It don't look like the tanks I does see in the videos. What should I be seeing? Can anyone help? Here at the pics.
IMG_20190415_165509.jpg
IMG_20190415_165523.jpg
IMG_20190415_165509.jpg IMG_20190415_165523.jpg IMG_20190415_165532.jpg IMG_20190415_165744.jpg IMG_20190415_165509.jpg IMG_20190415_165523.jpg IMG_20190415_165532.jpg IMG_20190415_165744.jpg
IMG_20190415_165509.jpg
IMG_20190415_165523.jpg
IMG_20190415_165532.jpg
IMG_20190415_165744.jpg
 

Latest posts

Top