Windshield Washer T fitting

Ford SportTrac Forum

Help Support Ford SportTrac Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Adam Smith

Active Member
Joined
Oct 2, 2003
Messages
156
Reaction score
13
Location
San Diego, CA
Don't know what category this fits in...

2004 Trac, windshield washer stopped spraying fluid, even though I could hear motor running and it was full. Inspection revealed plastic T fitting between fluid reservoir, and R/L side nozzle hoses was disconnected. After pulling apart, all three sides of T have left broken plastic in hoses. Don't know how I'm going to get them out. Any suggestions? And any suggestions on where to get replacement T? Thank you.

 
Last edited by a moderator:
Auto parts stores have the tee fittings in stock. Sometimes it will be a stepped fitting to fit several different hose sizes with the same fitting. If that is the one you find, just snip off the smaller bits to allow full flow for your hose size.
 
pulled the plastic parts out, well they disintegrated, when I screwed in a sheet metal screw. Now to get a replacement plastic t.
 
Top