Recent content by CLAY CARUTHERS

they are pretty much the same, so either is good, they are connected by a walkway, disney is awesome, we have a timeshare at wilderness lodge and go every january, have fun

you can weld a bump stop to the lower control arm, or weld a large nut and you can adjust a bolt into the nut where it needs to stop, and that way it will be adjustable. Also did you ever figure out the vacuum problem when you turn to full lock, i still have that prob. thanks

what an IDIOT, dude give up, your just asking for this stupid shit, because you wont leave it alone.:D

maybe the word (rape) hits a little close to home for mr tiger.

yes you will need to cut the lower lip off of the control arm (pretty much just just grind it flush), also i did not use the steering bumps

have you figured out what the vacuum problem was with your trac yet, i havnt been able to find mine yet, was curious to see if found anything. thanks

But why would it do this only at full turn,. no other time at all

It only happens on full turn either way not going straight or normal turning while driving, its like there is a vacuum hose or something that is getting pinched or something, only since i did the lift, everything was great before the lift, so i'm thinking it has to be a hose that is too short...

mine does the same thing after the lift, but only when i turn the wheel max to either side

i didnt have to modify the top on mine, i did have to trim the bottom one though

hey dan, which camber bolts do you have, and where can i get them

does anyone know of any adjustable control arms made for a 2wd. mine is lifted on 35's with just suspension lift, and i need to fix the camber a little, any help will be appreciated, thanks

Brandon 64 or anyone that has the soa, i need part #s for the shocks please, also need #s for the front, i have 3in spindles and longer torsion bolts.

i have the fabtech 3in spindles with longer torsion bolts, i did the soa for the rear, total of about 6-7 inches of lift. I have 35 in tires on mine. I am about to do the 3in body lift as well, i want to go with 37's on 20 in wheels:unsure: