Todd Z

I did mine 10+ years ago - some grinding, tab relocation, stainless lines, DOT 5, and good to go. Problem free for 100k so far.

gently... but easy...

https://a.co/d/fAnNOJy Something like this.

Its only going to fail, I've had no luck with additives for this. the ethanol in the gas kills the sending unit.

Once you remove the screws and i think a few plastic fasteners, just slide it a little, you will figure it out, once the big cover is...

You know though a bigger motor doesn't change brakes, trans, gearing, suspension and all the other factors that go into a vehicles...

Oval auto sells a bracket that you can modify a mustang wilwood kit with larger rotors and calipers. its not cheap but is doable and has...

to the floor no, maybe if you swap the tracks it might. BUT the tracks are the power part. so no.

once its all apart dont just yank, it has hooks that you need to slide it first.

amazon, buy the tool.

Yes, MUST swap all the exterior accessories and complete intake.

Ive seen photos before, Big issue is the tailgate weight. Its not designed to hold more then 1-200 lbs. Maybe a piece of plywood down...

It will not fix it.

Absolutely. That stuff is some of the biggest nightmare on the planet. It clogs, radiators and clogs heater cores, and something very...

sport 2 door ( 98-03??) work but 4 door does not.